Electrocatalysis in Solid Acid Fuel Cells

Solid state electrochemical reactions play a crucial role in many energy conversion devices, yet the pathways of many reactions remain unknown. The elusiveness of the reaction mechanisms is due, in part, to the complexity of electrochemical reactions; because electrochemical reactions require the interaction of many species (e.g., ions, electrons, and adsorbates) across multiple phases (e.g., electrolyte, catalyst, and gas phases), elucidation of the reaction pathway can quickly become complicated. In this work, we develop and utilize model catalyst | electrolyte systems, that is, structures of reduced complexity, to study electrode reactions in solid acid fuel cells which operate at intermediate temperatures of ~ 250 ºC. We employ AC impedance spectroscopy to explore the reaction pathway for hydrogen electro-oxidation over Pt thin films sputter-deposited atop the proton-conducting solid acid electrolyte CsH2PO4. We observed that hydrogen electro-oxidation occurs by diffusion of hydrogen through Pt, taking advantage of the entire Pt | CsH2PO4 interfacial area rather than being confined to the triple-phase sites. This insight opens up new avenues for developing high performance electrodes with low Pt loadings by eliminating the requirement that Pt-based electrodes be comprised of high triple-phase site densities long considered to be critical for Pt electrocatalysis. Indeed, even for flat, planar electrodes of very thin Pt films, we obtained a Pt utilization that is significantly higher than in typical composite electrodes. We also demonstrate the efficacy of a new tool for probing the spatial heterogeneity of electrochemical reactions at the metal | electrolyte interface. We characterized oxygen electro-reduction kinetics at the nanoscale Pt | CsHSO4 interface at ~ 150 ºC using conducting atomic force microscopy in conjunction with cyclic voltammetry and AC impedance spectroscopy. Not only did we find the electrochemical activity for oxygen electro-reduction to vary dramatically across the electrolyte surface but the current-voltage data, when analyzed in the Butler-Volmer framework, exhibited a strong counter-correlation between two key kinetic parameters, the exchange coefficient and exchange current. Specifically, the exchange current spanned five orders of magnitude while the exchange coefficient ranged between 0.1 and 0.6. Such a correlation has not been observed before and points to the power of atomic force microscopy for electrochemical characterization at electrolyte | metal | gas boundaries in general. As reduction in microstructural complexity is a key advantage in model electrode | electrolyte systems, we also sought to understand the bulk properties of solid acid compounds, specifically, the relationship between microstructure and the superprotonic phase transition, the latter of which lends solid acid compounds their high proton conductivities at intermediate temperatures. We found a correlation between phase transformation hysteresis and crystallographic compatibility of the high- and low-temperature phases of the Cs1–xRbxH2PO4 solid solution series. Therefore, it is to be expected that hysteresis, and therefore microcrack formation, can be minimized during phase transformation via the principle of crystallographic compatibility. This is confirmed in single crystals of CsHSO4, which was found to have higher crystallographic compatibility, lower hysteresis, and significantly fewer microcracks formed during phase transition compared to CsH2PO4. The apparent applicability of the theory of crystallographic compatibility implies a new tool for identifying solid acid compounds with suitable microstructures for fuel cell application and for model electrode | electrolyte systems. </p

Platinum thin film anodes for solid acid fuel cells

Hydrogen electro-oxidation kinetics at the Pt | CsH_2PO_4 interface have been evaluated. Thin films of nanocrystalline platinum 7.5–375 nm thick and 1–19 mm in diameter were sputtered atop polycrystalline discs of the proton-conducting electrolyte, CsH_2PO_4, by shadow-masking. The resulting Pt | CsH_2PO_4 | Pt symmetric cells were studied under uniform H_2-H_2O-Ar atmospheres at temperatures of 225–250 °C using AC impedance spectroscopy. For thick platinum films (>50 nm), electro-oxidation of hydrogen was found to be limited by diffusion of hydrogen through the film, whereas for thinner films, diffusion limitations are relaxed and interfacial effects become increasingly dominant. Extrapolation to vanishing film thickness implies an ultimate interfacial resistivity of 2.2 Ω cm^2, likely reflecting a process at the Pt | H_(2(g)) interface. Films 7.5 nm in thickness displayed a total electro-oxidation resistivity, R, of 3.1 Ω cm^2, approaching that of Pt-based composite anodes for solid acid fuel cells (1–2 Ω cm^2). In contrast, the Pt utilization (R^(−1)/Pt loading), 19 S mg^(−1), significantly exceeds that of composite electrodes, indicating that the thin film approach is a promising route for achieving high performance in combination with low platinum loadings

Nanoscale Electrodes by Conducting Atomic Force Microscopy: Oxygen Reduction Kinetics at the Pt|CsHSO_4 Interface

We quantitatively characterized oxygen reduction kinetics at the nanoscale Pt|CsHSO_4 interface at ~150 °C in humidified air using conducting atomic force microscopy (AFM) in conjunction with AC impedance spectroscopy and cyclic voltammetry. From the impedance measurements, oxygen reduction at Pt|CsHSO_4 was found to comprise two processes, one displaying an exponential dependence on overpotential and the other only weakly dependent on overpotential. Both interfacial processes displayed near-ideal capacitive behavior, indicating a minimal distribution in the associated relaxation time. Such a feature is taken to be characteristic of a nanoscale interface in which spatial averaging effects are absent and, furthermore, allows for the rigorous separation of multiple processes that would otherwise be convoluted in measurements using conventional macroscale electrode geometries. The complete current-voltage characteristics of the Pt|CsHSO_4 interface were measured at various points across the electrolyte surface and reveal a variation of the oxygen reduction kinetics with position. The overpotential-activated process, which dominates at voltages below -1 V, was interpreted as a charge-transfer reaction. Analysis of six different sets of Pt|CsHSO_4 experiments, within the Butler-Volmer framework, yielded exchange coefficients (α) for charge transfer ranging from 0.1 to 0.6 and exchange currents (i_0) spanning 5 orders of magnitude. The observed counter-correlation between the exchange current and exchange coefficient indicates that the extent to which the activation barrier decreases under bias (as reflected in the value of α) depends on the initial magnitude of that barrier under open circuit conditions (as reflected in the value of i_0). The clear correlation across six independent sets of measurements further indicates the suitability of conducting AFM approaches for careful and comprehensive study of electrochemical reactions at electrolyte-metal-gas boundaries

Engineering the Next Generation of Solid State Proton Conductors: Synthesis and Properties of Ba_(3−x)K_(x)H_(x)(PO_4)_2

A new series of compounds with general chemical formula Ba_(3−x)K_(x)H_(x)(PO_4)_2 has been successfully prepared. This particular stoichiometry was targeted as a candidate solid-state proton conductor because of its anticipated structural similarity to known M_(3)H(XO_4)_2 superprotonic conductors (M = Cs, Rb, NH4, K; X = Se, S) and to the known trigonal compound Ba_(3)(PO_4)_2. The materials were synthesized from aqueous solution using barium acetate, dipotassium hydrogen phosphate, and potassium hydroxide as starting materials. Through variations in the initial solution stoichiometry or the synthesis temperature, the final stoichiometry could be controlled from x ~ 0.5 to ~1. X-ray powder diffraction, energy dispersive spectroscopy chemical analysis, ^(1)H magic angle spinning (MAS) nuclear magnetic spectroscopy, and thermogravimetric analysis were all employed to establish potassium and proton incorporation. The diffraction data confirmed crystallization of a trigonal phase, and chemical analysis showed the (Ba+K):P ratio to be 3:2, consistent with the target stoichiometry. The conductivity of the Ba_(3−x)K_(x)H_(x)(PO_4)_2 materials, as measured by A.C. impedance spectroscopy, is about 3 orders of magnitude greater than the end-member Ba_(3)(PO_4)_2 material with only a slight dependence on x, however, it is substantially lower than that of typical superprotonic conductors and of the M_(3)H(XO_4)_2 materials in particular. The close proximity of Ba to the hydrogen bond site is proposed to explain this behavior. At 250 °C, the conductivity is 2.4 × 10^(−5) S/cm for the composition x = 0.80, which, when combined with the water insolubility and the relatively high thermal stability, may render Ba_(3−x)K_(x)H_(x)(PO_4)_2 an attractive alternative in selected electrochemical applications to known superprotonic conductors

Composite nanostructured solid-acid fuel-cell electrodes via electrospray deposition

Stable, porous, nanostructured composite electrodes were successfully fabricated via the inexpensive and scalable method of electrospray deposition, in which a dissolved solute is deposited onto a substrate using an electric field to drive droplet migration. The desirable characteristics of high porosity and high surface area were obtained under conditions that favored complete solvent evaporation from the electrospray droplets prior to contact with the substrate. Solid acid (CsH_2PO_4) feature sizes of 100 nm were obtained from electrosprayed water–methanol solutions with 10 g L^(−1) CsH_2PO_4 and 5 g L^(−1) Pt catalyst particles suspended using polyvinylpyrrolidone (PVP). Alternative additives such as Pt on carbon and carbon-nanotubes (CNTs) were also successfully incorporated by this route, and in all cases the PVP could be removed from the electrode by oxygen plasma treatment without damage to the structure. In the absence of additives (Pt, Pt/C and CNTs), the feature sizes were larger, 300 nm, and the structure morphologically unstable, with significant coarsening evident after exposure to ambient conditions for just two days. Electrochemical impedance spectroscopy under humidified hydrogen at 240 °C indicated an interfacial impedance of ~1.5 Ω cm^2 for the Pt/CsH_2PO_4 composite electrodes with a total Pt loading of 0.3 ± 0.2 mg cm^(−2). This result corresponds to a 30-fold decrease in Pt loading relative to mechanically milled electrodes with comparable activity, but further increases in activity and Pt utilization are required if solid acid fuel cells are to attain widespread commercial adoption

Clustered Coding Variants in the Glutamate Receptor Complexes of Individuals with Schizophrenia and Bipolar Disorder

Current models of schizophrenia and bipolar disorder implicate multiple genes, however their biological relationships remain elusive. To test the genetic role of glutamate receptors and their interacting scaffold proteins, the exons of ten glutamatergic ‘hub’ genes in 1304 individuals were re-sequenced in case and control samples. No significant difference in the overall number of non-synonymous single nucleotide polymorphisms (nsSNPs) was observed between cases and controls. However, cluster analysis of nsSNPs identified two exons encoding the cysteine-rich domain and first transmembrane helix of GRM1 as a risk locus with five mutations highly enriched within these domains. A new splice variant lacking the transmembrane GPCR domain of GRM1 was discovered in the human brain and the GRM1 mutation cluster could perturb the regulation of this variant. The predicted effect on individuals harbouring multiple mutations distributed in their ten hub genes was also examined. Diseased individuals possessed an increased load of deleteriousness from multiple concurrent rare and common coding variants. Together, these data suggest a disease model in which the interplay of compound genetic coding variants, distributed among glutamate receptors and their interacting proteins, contribute to the pathogenesis of schizophrenia and bipolar disorders

Synaptopathies: Dysfunction of Synaptic Function Confirmed rare copy number variants implicate novel genes in schizophrenia

Abstract Understanding how cognitive processes including learning, memory, decision making and ideation are encoded by the genome is a key question in biology. Identification of sets of genes underlying human mental disorders is a path towards this objective. Schizophrenia is a common disease with cognitive symptoms, high heritability and complex genetics. We have identified genes involved with schizophrenia by measuring differences in DNA copy number across the entire genome in 91 schizophrenia cases and 92 controls in the Scottish population. Our data reproduce rare and common variants observed in public domain data from &gt;3000 schizophrenia cases, confirming known disease loci as well as identifying novel loci. We found copy number variants in PDE10A (phosphodiesterase 10A), CYFIP1 [cytoplasmic FMR1 (Fragile X mental retardation 1)-interacting protein 1], K + channel genes KCNE1 and KCNE2, the Down&apos;s syndrome critical region 1 gene RCAN1 (regulator of calcineurin 1), cell-recognition protein CHL1 (cell adhesion molecule with homology with L1CAM), the transcription factor SP4 (specificity protein 4) and histone deacetylase HDAC9, among others (see http://www.genes2cognition.org/SCZ-CNV). Integrating the function of these many genes into a coherent model of schizophrenia and cognition is a major unanswered challenge

The Role of Cadmium and Nickel in Estrogen Receptor Signaling and Breast Cancer: Metalloestrogens or Not?

During the last half-century, incidences of breast cancer have increased globally. Various factors —genetic and environmental— have been implicated in the initiation and progression of this disease. One potential environmental risk factor that has not received a lot of attention is the exposure to heavy metals. While several mechanisms have been put forth describing how high concentrations of heavy metals play a role in carcinogenesis, it is unclear whether chronic, lowlevel exposure to certain heavy metals (i.e. cadmium and nickel), can directly result in the development and progression of cancer. Cadmium and nickel have been hypothesized to play a role in breast cancer development by acting as metalloestrogens— metals that bind to estrogen receptors and mimic the actions of estrogen. Since the lifetime exposure to estrogen is a wellestablished risk factor for breast cancer, anything that mimics its activity will likely contribute to the etiology of the disease. However, heavy metals, depending on their concentration, are capable of binding to a variety of proteins and may exert their toxicities by disrupting multiple cellular functions, complicating the analysis of whether heavy metal-induced carcinogenesis is mediated by the estrogen receptor. The purpose of this review is to discuss the various epidemiological, in vivo, and in vitro studies that show a link between the heavy metals, cadmium and nickel, and breast cancer development. We will particularly focus on the studies that test whether or not these two metals act as metalloestrogens in order to assess the strength of the data supporting this hypothesis

Influenza vaccination for immunocompromised patients: systematic review and meta-analysis from a public health policy perspective.

Immunocompromised patients are vulnerable to severe or complicated influenza infection. Vaccination is widely recommended for this group. This systematic review and meta-analysis assesses influenza vaccination for immunocompromised patients in terms of preventing influenza-like illness and laboratory confirmed influenza, serological response and adverse events